Monitored Fire Alarms Vs Smoke Detectors In Washington, DC

The National Fire Protection Agency advises you place a smoke detector.  At a minimum, your home should use a smoke detector in every bedroom, the hallways outside sleeping quarters, and on every level of the building (don’t forget the basement). Though, should you just buy an ordinary smoke detector, or should you opt for a more cutting-edge monitored fire alarm? Let's look into the monitored fire alarm vs. smoke detector in Washington, DC debate and see which tool you ought to buy for your loved ones and home.

Standard Smoke Detectors Only Detect Smoke

As the name suggests, ordinary smoke detectors only trigger when they detect an ample amount of smoke. Then they turn on -- usually with a high-volume beeping -- until you reset the alarm. However, that doesn’t necessarily do any good if nobody’s home to hear the alert.

Optimally, you need to install dual sensor smoke detectors that are sensitive for both smoke from both blazing and smoldering remains. It might be best to interconnect your components so every alarm goes off in unison. This way, you will know if there's a flame from above, even if it happens from a mishap in the ground floor.

Monitored Fire Alarms Alert You To A Fire Emergency When You Are In The House Or Away

A monitored fire alarm aesthetically appears and hangs in a similar way as your common smoke detector. If they detect fire conditions anywhere in the house, they'll create a high-pitched warning. However, there's a myriad of things that your monitored fire alarms will provide that your smoke detectors isn’t able to.

For starters, high-tech sensors will scan for growing hot air levels in addition to different kinds of smoke. When they discover a blaze, they'll alert your monitoring specialist as well as ring the high-volume alarm. That frees you to focus on escaping out of harm’s way as your monitoring specialist contacts the fire department. And since your monitoring team is always alert, your alarms never fail to contact help even if you’re traveling.

Monitored fire alarms commonly pair into your Washington, DC home security system. Other tools networked to the same system can be told to activate when your fire alarms trigger. For example, your smart thermostat can instinctively activate the vent fan, which may help prevent further spread. Or have your entire home spring into operation when the lights come on, your locks open, and your security alarms disarms. You can also have your system issue your mobile device a notification to know that your home's in peril while you're out on vacation.

 

The Decision In Monitored Fire Alarms Vs. Smoke Detectors in Washington, DC

It's pretty easy to recognize what comes out on top in a straight match-up between monitored fire alarms and smoke detectors. You just get so many additional benefits with a monitored fire alarm.

Run-of-the-Mill Smoke Detectors:

● Sounds high-decibel bell when the device detects an abundance of smoke

Monitored Fire Alarms

● Sounds high-decibel siren when the device senses an abundance of smoke

● PLUS has sensors for rising heat

● PLUS works with your ADT home security system

● PLUS notifies a 24/7 monitoring center which will contact emergency professionals

● PLUS sends you a notification to your mobile device

Get Monitored Fire Alarms For Your Washington, DC Security System

To pull the most from your monitored fire alarms, use a state-of-the-art security system, like ADT. Lucky for you, Secure24 Alarm Systems can customize your ADT home security deal to include fire and safety alarms. Just call (202) 221-4066 or submit in the form below to get started.